The short answer
Professional chefs mostly use three kinds of cutting boards:
- Commercial plastic boards, usually thick high-density polyethylene (HDPE), often in different colors for different foods. These are the workhorses of most restaurant kitchens.
- Thick hardwood boards, typically maple, walnut or cherry, either end grain or edge grain. Many chefs prefer these for their own knives and for carving or presentation.
- Soft rubber or synthetic boards, which are very gentle on knife edges and popular with cooks who use thin Japanese knives, including at many sushi counters.
What a given chef uses depends a lot on the kind of kitchen. In a busy restaurant, speed of cleaning and food safety rules usually come first. At home or at a personal station, many chefs choose wood or rubber because those surfaces are kinder to their knives.
Why restaurant kitchens are full of plastic boards
Walk into most commercial kitchens and you’ll see stacks of white and colored plastic boards. That’s not because chefs think plastic is the best surface for knives. It’s because plastic suits how restaurants work:
- They can go through a commercial dishwasher and be sanitized quickly between tasks.
- They’re cheap and easy to replace when they get scarred, which matters when a kitchen goes through boards fast.
- They’re light, so they’re easy to swap at a station dozens of times a shift.
- They come in colors, which makes it simple to keep raw meat, fish and produce apart.
Commercial boards are usually thicker and heavier than the thin plastic boards sold for home use, so they slide and flex less. Many are certified to food equipment standards, such as NSF in the United States.
Color-coding and food safety
Color-coded boards make it easy for a whole team to keep foods separate without thinking about it: one color for raw meat, another for poultry, another for fish, another for salad and so on. This reduces the risk of cross-contamination, and many kitchens also keep a dedicated color for allergen-free preparation. The exact colors vary by country and employer. We list a common scheme in our guide to the best cutting board material and color-coded boards.
Where wood fits in professional kitchens
Wood isn’t banned from restaurants. In the United States, the FDA Food Code, which many state and local health codes are based on, allows hard maple or similarly hard, close-grained wood for cutting boards and butcher blocks. Large maple boards from makers such as John Boos are a common sight in commercial kitchens and butcher shops.
Chefs who choose wood usually do so because:
- It’s gentle on knife edges, especially end grain, so knives stay sharp longer.
- It’s stable and quiet, and heavy boards don’t move during heavy prep.
- It looks good for carving at a station or serving in front of guests.
The trade-off is maintenance: wood must be hand washed, dried and oiled, and it can’t go through a dishwasher. That’s why a restaurant might use one big wooden board at a carving or pastry station and plastic everywhere else.
Rubber boards: the professional’s knife-friendly option
Rubber and soft synthetic boards are less familiar to home cooks but common in professional settings. They combine some of the best features of wood and plastic:
- They’re very gentle on edges, often considered even kinder than wood.
- They’re nonporous and easy to clean, and some are approved for commercial use.
- They don’t slide much on a steel prep table.
- They can usually be resurfaced by sanding rather than thrown away when scratched.
They’re heavier and more expensive than plastic, and many shouldn’t go in a dishwasher or near very high heat. In Japan, soft synthetic boards are widely used in professional kitchens alongside traditional wood. Our guide to cutting boards that dull knives and what Japanese knives need covers rubber and hinoki in more detail.
What different kinds of chefs tend to use
| Setting | Typical boards | Why |
|---|---|---|
| Busy restaurant line | Color-coded HDPE plastic | Fast cleaning, food safety, cheap to replace |
| Butcher shop or carvery | Thick maple blocks, heavy plastic | Stability for heavy cutting |
| Sushi and Japanese restaurants | Hinoki or other wood, soft synthetic boards | Protects thin, hard knives |
| Pastry kitchen | Wood, marble or stainless work surfaces | Dough work; marble stays cool |
| TV and demonstration kitchens | Large wooden boards | Looks good, quiet on camera, kind to knives |
| Chef cooking at home | Wood or rubber, plus a plastic board for raw meat | Comfort and edge life |
Marble and steel surfaces in a pastry kitchen are used for rolling and shaping dough, not for chopping with good knives.
What chefs avoid
Professional cooks generally don’t chop on glass, stone, ceramic or metal boards. These surfaces are rigid and slippery, they blunt and chip knife edges quickly, and a knife skidding on a hard surface is a safety risk. See will a glass cutting board dull knives? for the details on glass in particular.
They also avoid thin, flimsy boards that bend or slide, and they retire plastic boards once they’re covered in deep grooves that are hard to clean.
Habits professional cooks use with any board
The board is only part of it. A few habits are common in professional kitchens:
- A damp towel or non-slip mat under the board so it can’t slide. This is one of the first things many cooks learn.
- A board big enough for the task, so food isn’t falling off the edges and the knife has room to move.
- Changing or cleaning the board between raw proteins and ready-to-eat food.
- Scraping food off with the spine of the knife or a bench scraper, never the edge.
- Wiping the board down as they go rather than letting debris build up.
What a home cook can borrow from the pros
You don’t need a stack of color-coded boards at home. A setup that copies what many chefs use for themselves works well:
- A good wooden board (or a rubber board, if you have thin Japanese knives) for everyday prep. Around 12 by 18 inches suits most counters and sinks.
- A thick plastic board you keep for raw meat, poultry and fish, so it can go in the dishwasher.
- A damp towel underneath whenever you cut.
Pair a good board with good habits and your knives will need sharpening far less often. For the rest of the routine, see our guide on how to maintain knives.