Knife Care

Are Chef Knives Dishwasher Safe?

Why chef knives shouldn't go in the dishwasher, what a dishwasher-safe label really means, which knives suffer most, and how chefs wash knives by hand instead.

On this page
  1. The short answer
  2. What a dishwasher does to a knife
  3. What “dishwasher safe” on the box really means
  4. Which knives handle the dishwasher worst
  5. If you have to use the dishwasher
  6. How chefs wash their knives
  7. Is WD-40 good for cleaning knives?

The short answer

Most knife makers and cooks recommend keeping good chef knives out of the dishwasher. Some knives are sold as “dishwasher safe”, and they will usually survive a dishwasher cycle, but even those tend to dull faster and may look worse over time than knives washed by hand. Hand washing a chef’s knife takes less than a minute, so for most people it is the easier way to keep a knife sharp and in good condition.

The rest of this article explains why, which knives suffer most, and what to do if you really do need to use the machine.

What a dishwasher does to a knife

The edge gets knocked around

A knife edge is very thin at its apex. In a dishwasher, water jets push items around, and a knife in the cutlery basket or rack can rattle against metal tines, other cutlery, glasses and plates. Each knock can roll or chip a tiny section of the edge. One cycle won’t ruin a knife, but repeated cycles add up, and a knife that goes through the dishwasher regularly usually needs honing and sharpening sooner.

Detergent, heat and long wet cycles

Dishwasher detergents are formulated to be much stronger than hand dish soap, and many are alkaline and contain mildly abrasive or bleaching ingredients. Combined with high temperatures and a long period of moisture during washing and drying, this can:

  • Leave spots, stains or a dull, cloudy finish on stainless blades.
  • Cause rust spots or pitting on less corrosion-resistant steels, and strip the patina from carbon steel.
  • Discolour some coated or etched blade finishes.

Stainless steel resists rust, but it isn’t rust-proof. Knives often sit damp in the machine after the cycle ends, which is a good environment for spotting.

Handles take the worst of it

Handles are often where dishwasher damage shows first:

  • Wooden handles can dry out, swell, crack or lose their finish with repeated heat and moisture.
  • Riveted or glued handles can develop gaps where water gets in, and adhesives may weaken over time.
  • Some plastic handles can fade, roughen or become brittle.

If your knife has a wooden handle, see our guide to caring for wooden knife handles for how to keep it in good shape.

Loading and unloading is a cut risk

Sharp knives in a dishwasher basket are easy to grab by the wrong end, especially point-up. That risk is part of why many people prefer to wash knives separately.

What “dishwasher safe” on the box really means

When a manufacturer labels a knife dishwasher safe, it generally means the materials are expected to tolerate a dishwasher: the handle won’t fall apart and the steel shouldn’t corrode badly under normal conditions. It doesn’t usually mean the edge will stay as sharp as it would with hand washing, and many makers who use the label still recommend hand washing in their care instructions. Check the specific maker’s guidance for your knife. For one brand’s advice, see can you put Wüsthof knives in the dishwasher?

Which knives handle the dishwasher worst

Knife type Dishwasher risk Main problems
Carbon steel High Rust, loss of patina, staining
Wooden handle (any steel) High Cracking, swelling, gaps at rivets
Damascus or etched finish High Dulled or discoloured pattern, spotting
Thin, hard Japanese blades High Chipped edges from knocks
Ceramic blade High Chipping, cracking if knocked
Stamped stainless, plastic handle Lower Faster dulling, some spotting

Ceramic knives and their disadvantages

Ceramic knives are sometimes described as easy-care because the blade doesn’t rust. They do have real drawbacks, though:

  • They are brittle. Ceramic blades can chip or snap if dropped, twisted, or knocked against something hard, including in a dishwasher.
  • They aren’t suited to hard tasks. Prying, cutting bone, frozen food or hard rinds is a common cause of chipping.
  • Sharpening is harder. A regular honing steel won’t work on ceramic, and sharpening usually needs diamond abrasives or a return to the maker.
  • They don’t stick to most magnetic strips, so storage takes more thought.

They are a reasonable choice for slicing fruit and vegetables, but they need as much care as a steel knife, just of a different kind.

If you have to use the dishwasher

Sometimes hand washing isn’t practical. If a knife must go in the machine, these steps reduce the damage:

  1. Only use it for knives labelled dishwasher safe, ideally inexpensive ones with synthetic handles.
  2. Secure the knife so it can’t move. A dedicated knife slot on the top rack, if your dishwasher has one, is better than the cutlery basket.
  3. Keep it away from other metal items so it can’t rattle against them.
  4. Load it handle-up or lying flat, never point-up in a basket.
  5. Remove it as soon as the cycle finishes and dry it by hand rather than leaving it to sit in the warm, damp machine.

How chefs wash their knives

Professional cooks generally clean knives by hand, often several times during a shift. The routine is simple and works at home:

  1. Wipe as you go. Keep a damp cloth nearby and wipe the blade between tasks, especially after acidic or sticky foods.
  2. Wash right after use with warm water, a small amount of dish soap and a soft sponge or cloth.
  3. Wipe from spine to edge, holding the handle with the edge pointing away from you, so your hand never slides along the edge.
  4. Rinse and dry immediately with a clean towel, including the area around the bolster and handle.
  5. Put it straight back in its storage, not loose in the sink or on the counter. If you’re choosing storage, our comparison of magnetic strips, knife blocks and drawer inserts covers the options.

Never leave a knife soaking in a sink full of soapy water: it’s easy to grab blindly, and soaking is hard on handles and on carbon steel.

Is WD-40 good for cleaning knives?

WD-40 isn’t a good cleaner for kitchen knives, because it isn’t designed as a food-safe product. Some people use it to loosen grime in the pivot of a pocket knife that doesn’t touch food. For a kitchen knife, warm soapy water is all the cleaning it needs, and a thin coat of food-grade mineral oil or camellia oil is a better choice if you want to protect a carbon steel blade.

For the full daily routine, from washing to honing to storage, see our guide on how to maintain knives. And if a dishwasher cycle has already left rust spots, our guide to removing rust from a knife explains how to clean them off safely.

The complete guide to knife care

How to Maintain Knives: Cleaning, Storage and Care
Read the guide

Keep exploring

Guides from other topics

All topics →