Good knife maintenance is mostly a handful of small habits repeated every time you cook. None of them takes more than a minute, and together they do more to keep a knife sharp, safe and rust-free than any special product. This guide covers the routine for kitchen knives and pocket knives, and links to more detailed guides where a topic needs more room.
The short version: a knife care routine
If you only remember a few things, make it these:
- Wash by hand soon after use with warm water, a little dish soap and a soft sponge.
- Dry the knife straight away with a towel, including the area where the blade meets the handle.
- Cut on a forgiving surface such as wood, soft plastic or rubber, never on glass, stone or metal.
- Store it so the edge touches nothing: a magnetic strip, a block, a drawer insert or an edge guard.
- Hone regularly and sharpen when honing stops working.
- Keep it out of the dishwasher and out of a sink full of water.
The rest of this guide explains why each step matters and how to adjust it for different knives.
Cleaning knives the right way
Wash by hand, right after use
Food residue is easiest to remove before it dries, and acidic or salty foods (citrus, tomatoes, onions, brine) are the ones most likely to mark or spot a blade if they sit on it. Washing soon after use avoids both problems.
Hold the knife by the handle with the edge facing away from you, and wipe the blade from the spine toward the edge with a soapy sponge or cloth, so your fingers never run along the cutting edge. Avoid abrasive scourers and steel wool for routine cleaning; they scratch the finish and can catch on the edge.
Dishwashers are hard on knives in several ways at once: the edge can knock against racks and other items, detergents are harsh, and the long hot, wet cycle is tough on handles and can encourage spotting. We cover this in detail in are chef knives dishwasher safe?, including what “dishwasher safe” labels actually mean.
Why you shouldn’t leave knives soaking in the sink
Leaving knives to soak in a sink of soapy water is a common habit, and it’s worth breaking. There are two problems:
- Safety. A blade hidden under suds is easy to grab by the edge when you reach in. This is a common way to get cut in a home kitchen.
- Damage. Prolonged soaking is bad for wooden handles, which can swell and crack, and can loosen the fit around rivets and bolsters. It also gives carbon steel time to rust, and the knife can get knocked around by pots and plates.
If something is truly stuck on, lay the knife on the counter, wipe it with a hot, soapy cloth, wait a minute, and wipe again.
Drying properly
Drying is where many rust spots start or are prevented. Towel the blade dry immediately rather than leaving it in a dish rack, and pay attention to the junction of blade and handle and any gaps around a bolster, where water tends to sit. Let the knife air for a few minutes before putting it in a closed block or drawer if it still feels damp.
Is WD-40 good for cleaning knives?
WD-40 can help loosen grime and displace water, and some people use it on pocket knife pivots and tools that never touch food. It is not designed as a food-safe product, though, so it isn’t a good choice for kitchen knives. For a knife that touches food, a food-grade mineral oil or camellia oil does the protective job without that concern. If you do use WD-40 on a pocket knife, wash and dry the blade before using it on food.
Stainless steel vs carbon steel: how care differs
Stainless steel contains enough chromium to resist rust well in normal kitchen use. It is not rust-proof, and it can still spot or pit if left wet or salty for long, but the basic wash-and-dry routine is usually enough.
Carbon steel (and semi-stainless steels) will rust much more readily. Many cooks choose it because it takes a very keen edge and is often easier to sharpen. It needs a little more attention:
- Wipe the blade during prep, especially when cutting acidic foods.
- Dry it thoroughly every time.
- Apply a very thin coat of food-safe oil before storing it for more than a day or two, particularly in humid weather.
Patina, acids and vinegar
Carbon steel darkens with use as it reacts with food. This grey, blue or brownish layer is called a patina, and a stable patina offers some protection against red rust. Acids speed up this reaction, which is why some people deliberately force a patina with vinegar or mustard. Acids can also etch or pit steel if left on too long. For the details, see what does vinegar do to a knife blade?
Protect the edge while you cut
Cutting board choice
The surface under the knife has a big effect on how long an edge lasts. Wood (especially end grain), soft plastic and rubber boards give slightly under the blade. Glass, stone, ceramic and metal boards don’t, so the edge rolls or chips against them. Our guide to the best cutting board material for knives compares the options, and cutting boards that dull knives explains what to avoid, including what thinner Japanese blades need.
Habits that dull or chip a blade
- Scraping food across the board with the edge. Turn the knife over and use the spine, or use a bench scraper.
- Cutting through bone or frozen food with a thin chef’s knife. Use a cleaver or a dedicated tool.
- Twisting or prying. Knife edges are thin and can chip or snap under sideways force. Don’t use the tip as a screwdriver or can opener.
- Cutting on plates, countertops or in metal pans.
- Letting knives knock together in a drawer or sink.
Storing knives safely
Good storage keeps the edge from touching anything and keeps your hands away from the edge. The main options are a wall-mounted magnetic strip, a countertop block, an in-drawer insert, and individual edge guards (sayas or plastic sleeves). Each has trade-offs around space, safety around children, and how gently the edge is treated; we compare them in magnetic knife strip vs knife block vs drawer.
The one option to avoid is loose in a utensil drawer, where blades get chipped against other tools and fingers get cut reaching in.
Should knives be stored edge up or edge down?
In a knife block, the usual advice is to let the knife rest on its spine rather than its edge. In an angled block, that means inserting the knife with the edge facing up, so the blade’s weight sits on the spine and the edge doesn’t drag along the bottom of the slot every time you pull it out. In a block with horizontal slots, the same thing happens naturally when the knife lies spine-down. In a drying rack or utensil caddy, point-down is generally the safer orientation for your hands. Whatever the storage, the goal is the same: no pressure on the edge, and no exposed edge where you reach.
Honing and sharpening as part of maintenance
Honing and sharpening are different jobs:
- Honing uses a steel or ceramic rod to straighten an edge that has rolled slightly out of line during use. It removes little or no metal. Many cooks hone every few uses.
- Sharpening removes metal to create a fresh edge, using whetstones, a guided system, a pull-through sharpener or a professional service. How often depends on the steel and how much you cook; for many home cooks it is a few times a year.
A simple test: if the knife slides off the skin of a tomato or crushes rather than slices, try honing first. If honing doesn’t bring back a clean bite, it’s time to sharpen.
Caring for handles
Synthetic handles need little beyond washing and drying. Wooden handles benefit from occasional oiling and need protection from long soaks and dishwasher heat, both of which can lead to dryness, swelling and cracks. See how to care for wooden knife handles for oils to use and how to deal with small cracks and gaps.
Pocket knife maintenance
Pocket and folding knives pick up lint, dust and grit in the pivot and lock area, and they get handled with sweaty hands, which encourages rust on some steels. A basic routine:
- Clean the blade with warm, soapy water or a damp cloth, keeping water away from the pivot as much as practical if the knife isn’t designed to be rinsed.
- Clear the pivot and lock area with a soft brush or compressed air, working the blade open and closed to dislodge debris.
- Dry thoroughly, including inside the handle.
- Lubricate the pivot lightly with a knife pivot oil, or a food-safe oil if you cut food with it. A drop is usually enough; wipe away the excess, which otherwise attracts dirt.
- Check the screws occasionally if your knife has them and the manufacturer allows owner maintenance.
Only take a folding knife apart if the maker supports it, as disassembly can void some warranties.
Dealing with rust
Light orange spots on a blade are usually surface rust and can often be removed with gentle methods such as a baking soda paste, a brief vinegar treatment or a rust eraser. Aggressive scrubbing can scratch the finish or damage the edge. Our step-by-step guide on how to remove rust from a knife without ruining the blade covers which method to use for which kind of rust.
A simple maintenance schedule
| How often | Task |
|---|---|
| Every use | Wash by hand, dry immediately, store safely |
| During prep | Wipe carbon steel blades, especially with acidic foods |
| Every few uses | Hone on a steel or ceramic rod |
| Every few weeks to months | Oil wooden handles; check pocket knife pivots |
| A few times a year (varies) | Sharpen, or when honing no longer restores the edge |
| As needed | Remove rust spots; replace deeply grooved cutting boards |
The schedule is a starting point rather than a rule. A knife used daily in a busy kitchen will need honing and sharpening more often than one used a few times a week, and carbon steel needs more attention than stainless. The habits that matter most are the daily ones: wash, dry, and keep the edge away from anything hard.