The short answer
For most home cooks, a good chef’s knife is an 8-inch blade from a reputable maker that feels comfortable in your hand, is thin enough behind the edge to slice cleanly, and is made from a steel you’re willing to look after. That could be a German-style knife such as a Wüsthof Classic or Zwilling Pro, a Japanese-style knife such as a MAC, Shun, Tojiro or Global, or a budget workhorse such as a Victorinox or Mercer.
The “best” chef’s knife isn’t one model. It’s the one that suits your hand, your cooking and your willingness to keep it sharp. This guide covers how to tell a good knife from a poor one, which choices matter most, and which knives chefs and testers return to again and again.
Good knives vs bad knives: what actually makes the difference
Price and brand are only rough signals. A few things decide whether a knife is pleasant to use for years or frustrating within months.
Heat treatment and steel
Steel is only as good as its heat treatment, the controlled hardening and tempering that sets how hard and tough the blade is. A well-treated, modest stainless steel often outperforms a fancy steel that was treated badly. You can’t see heat treatment, which is why buying from established makers with a track record is a reasonable shortcut.
In practice:
- Softer steels (many German knives sit around 56–58 HRC on the Rockwell hardness scale) are tough and forgiving, and they’re easy to hone and sharpen, but they need touching up more often.
- Harder steels (many Japanese knives sit around 60–63 HRC) take and hold a finer edge, but they’re more prone to chipping if twisted or used on bone.
Edge geometry (thin behind the edge)
This matters more than most buyers realise. A blade that’s thin just above the cutting edge glides through an onion or a carrot; a thick one wedges and cracks food even when it’s sharp. Many cheap knives feel dull partly because they’re simply thick. When you can, slice a firm vegetable such as a carrot or potato to test it. A good knife goes through cleanly rather than splitting it.
Fit, finish and handle
A good knife has no gaps between the handle and the tang, no rough spine edges that dig into your fingers, and a handle that stays secure when wet. The heel and spine should feel smooth where your pinch grip rests. These details don’t show up on a spec sheet, but you’ll notice them every time you cook.
Warning signs of a poor knife
- A blade that flexes noticeably when you press it flat on a board
- Handles that wobble, creak or have visible gaps
- A thick edge that crushes tomatoes or splits carrots
- Steel that rusts or spots quickly despite being sold as stainless
- Big marketing claims (a “never needs sharpening” edge, Damascus patterns on very cheap knives) with little information about the steel itself
Western vs Japanese chef’s knives
Western (German or French-style) chef’s knives usually have a curved belly for rocking, a heavier blade, softer steel and a bolster at the heel. They’re forgiving, handle tougher jobs like splitting squash, and suit cooks who rock the knife while chopping.
Japanese-style chef’s knives (gyuto) are usually lighter and thinner, with harder steel, a flatter profile and a more acute edge. They excel at push-cutting and precise slicing but need more care. Avoid bones and frozen food, and avoid twisting the blade in hard vegetables. Our gyuto vs Western chef’s knife comparison looks at the differences in shape, weight and edge.
Plenty of knives sit between the two, with Japanese steel and a Western handle and profile. If you’re drawn to the lighter style, our guide to Japanese knives for beginners covers which shapes and features make a good first one.
Size, weight and balance
An 8-inch (about 20 cm) blade is the usual starting point. It’s long enough for most produce and roasts without feeling unwieldy on a typical home cutting board. Cooks with large boards, big hands or heavy prep loads may prefer 9 or 10 inches; those with small boards or smaller hands may like 6 or 7 inches. We compare the options in detail in 8-inch vs 10-inch chef’s knife.
Weight is personal. Heavier knives can feel stable and help power through dense food; lighter knives feel nimble and cause less fatigue over long sessions. Balance (where the knife’s weight centres when you hold it at the bolster or heel) also changes how a knife feels. Many people like a balance point near where the pinch grip sits.
Construction: forged, stamped and tang
You’ll see “forged” and “full tang” used as quality badges. They tell you something about weight and style, but less about performance than the marketing suggests.
- Forged knives are shaped from a heated piece of steel and often have a bolster. Stamped knives are cut from sheet steel. Excellent knives exist in both styles. See forged vs stamped knives for what really differs.
- Tang describes how far the blade’s steel extends into the handle. A full tang adds weight to the handle and is common on Western knives; many Japanese knives use hidden partial tangs without any problem. Our full tang vs partial tang guide explains what to check.
Steel types in plain language
- German stainless (often X50CrMoV15 or similar): tough, corrosion-resistant, easy to sharpen. Needs regular honing.
- Japanese stainless (such as VG-10, AUS-8 and AUS-10): harder, holds a finer edge, still fairly rust-resistant.
- Powder steels (such as SG2/R2): very hard and good at holding an edge; usually more expensive and harder to sharpen.
- Carbon steel (such as Shirogami/white and Aogami/blue): takes a superb edge and is easy to sharpen, but rusts and discolours without prompt drying. Better as a second knife for most people.
- Ceramic: very sharp and holds its edge, but brittle and difficult to sharpen at home.
For more on what each metal does, see our guide to the best knife steel. If edge retention is your priority, see the sharpest kitchen knives and the ones that stay sharp.
How much to spend
Reliable chef’s knives start at roughly $30–$50, and many people find the best value between about $50 and $150. Above that, you’re mostly paying for harder steels, finer finishing and craftsmanship rather than a dramatically better cutting experience. Our article on how much to spend on a chef’s knife breaks down each price tier, and if money is tight, our look at knives under $20 covers what’s possible at the very low end.
Knives that professional chefs and testers often use
Long-running favourites (2020 and since)
Searches for the “best chef’s knives of 2020” are still common, and the knives that topped reviews around then are mostly still recommended today. Models that have appeared repeatedly in independent testing and in professional kitchens include:
- Victorinox Fibrox Pro chef’s knife: a light, stamped, inexpensive workhorse often recommended as the best budget choice
- Mercer Culinary (Millennia, Renaissance, Genesis): common in culinary schools and restaurant kitchens because they’re affordable and durable
- MAC Professional (MTH-80): a thin, light Japanese-made knife with a Western profile, a long-time favourite of testers
- Wüsthof Classic and Zwilling Pro: classic forged German knives, heavier and very durable
- Tojiro DP gyuto: often suggested as a first Japanese knife thanks to its value
- Shun Classic and Global: widely available Japanese-made knives with distinctive looks and harder or lighter blades
Prices and model lines change, so check current reviews before buying. These names are a sensible shortlist, not a ranking.
What about Michelin-star kitchens?
There’s no single knife that Michelin-starred chefs use. Many professional cooks own their own knives, and preferences vary widely by cuisine and personal taste. Japanese-made knives, from both large brands and smaller workshops, are common in high-end kitchens, alongside classic German and French knives. The consistent thread is that pros keep their knives very sharp, not that they all buy one brand.
Is there a “#1 knife brand”?
No objective ranking exists. Names that appear again and again in professional kitchens and independent reviews include Wüsthof, Zwilling (and its Henckels and Miyabi lines), Victorinox, Mercer, Shun, Global, MAC, Misono and Tojiro. Any of these can be “the best” for a particular cook. Pick by fit, steel and price rather than by reputation alone. We look at the question in more depth in what is the #1 knife brand?, and our kitchen knife brands comparison sets the main names side by side.
What knives does Gordon Ramsay use?
Gordon Ramsay has been publicly associated with several brands. In his MasterClass cooking lessons he has been seen using Henckels/Zwilling knives, and he has a commercial partnership with HexClad, which sells knife sets alongside its cookware. Viewers have also spotted Wüsthof and other brands in his shows and restaurants. Because some of these are paid partnerships, it’s hard to say which knife is his personal “favourite”.
What he has said more consistently is that a cook needs a small number of good, sharp knives rather than a drawer full of dull ones: typically a chef’s knife, a paring knife, a serrated knife and a boning knife. That’s sound advice whatever brand you choose. If you’re curious about his cookware, see what kind of pans Gordon Ramsay uses. Bourdain’s famous recommendation is covered in the Japanese knife Anthony Bourdain recommended.
How to test a chef’s knife before you buy
If you can handle knives in a store, or buy from a retailer with a generous return policy:
- Hold it in a pinch grip: thumb and index finger on the blade just ahead of the handle. Check that nothing digs in.
- Check knuckle clearance: on the board, your knuckles shouldn’t hit the surface when the edge is down.
- Rock and push: mimic your normal cutting motion and notice whether the profile suits it.
- Feel the weight over a minute or two, not just a few seconds.
- Look down the spine to check that the blade is straight, and look for gaps at the handle.
- If allowed, cut something firm, such as a carrot or potato, to check whether the knife is thin enough behind the edge.
Good basic technique also changes how a knife feels. Our guide to the 5 basic knife skills covers grip, the claw and the essential cuts.
Caring for it once you own it
- Hand wash and dry the knife soon after use. Dishwashers can dull edges and damage handles.
- Use a wood or plastic cutting board, never glass, stone or ceramic.
- Hone softer Western knives regularly, and sharpen any knife when honing no longer restores the edge.
- Store it in a block, on a magnetic strip or in a blade guard rather than loose in a drawer.
If you’re thinking of buying several knives at once, read how to pick a good kitchen knife set first. Many sets are padded with knives you won’t use.
Quick checklist
- Comfortable in a pinch grip, with enough knuckle clearance
- Thin behind the edge; slices firm food without splitting it
- Steel and hardness that match how much care you’ll give it
- Length that suits your board and your cooking (8 inches is the usual default)
- Solid fit and finish: no gaps, no sharp spine edges
- A price that leaves room for a way to keep it sharp