The short answer
Most large pocket knife brands no longer make every knife in one place. One company can sell US-made, Taiwan-made and China-made models in the same catalog, often at very different prices. A brand’s headquarters tells you where the knives are designed and sold from. It doesn’t necessarily tell you where they’re made.
Two examples people search for a lot:
- CRKT (Columbia River Knife & Tool) is based in Tualatin, Oregon, but most of its knives are made by manufacturing partners in China and Taiwan. A small number of models are made in the USA.
- Camillus knives were made in Camillus, New York, for more than a century, but that factory closed in 2007. The Camillus name was later bought by another company, and current Camillus-branded knives are made overseas.
So the reliable way to know where a knife was made is to check that specific model, not the brand.
How to check where a knife was made
A few places usually give you the answer:
- The blade or tang stamp. Many knives carry the country on the blade, near the pivot: “USA,” “Taiwan,” “China” or “PRC,” “Japan” or “Seki Japan,” “Solingen Germany,” “Switzerland” or “France.” Some brands etch it on the back of the blade or on a handle liner instead.
- The box and the product page. US customs rules generally require imported goods to be marked with their country of origin, so the box or label usually says. Good retailers list the country in the specifications.
- The model, not the brand. Spyderco, Kershaw, Buck, Böker and others make different lines in different countries. One Spyderco might be made in Colorado and the next in Japan or Taiwan.
- Wording such as “designed in.” “Designed in USA” or “Engineered in Oregon” says nothing about where a knife was made. Look for the word “made.”
With older knives, the stamp also helps you date the knife. Collectors use tang stamps to tell a 1950s Case from a 1990s one, for example. See our guide on how to date a Case knife by its tang stamp.
Brands still made mainly in the USA
These brands make all or most of their pocket knives in American factories:
- W.R. Case & Sons in Bradford, Pennsylvania. This is the best-known maker of traditional slipjoints such as trappers, stockmans and peanuts. Most Case knives use the company’s Tru-Sharp stainless steel; see Case Tru-Sharp surgical steel explained.
- Buck Knives in Post Falls, Idaho, after it moved from California in the mid-2000s. Most of the line is US-made, including the Buck 110 Folding Hunter. Buck has sold some imported models over the years, so check the listing.
- Benchmade in Oregon City, Oregon.
- Great Eastern Cutlery in Titusville, Pennsylvania, which makes traditional patterns.
- Bear & Son Cutlery in Jacksonville, Alabama.
- Chris Reeve Knives in Boise, Idaho, and Microtech, which has facilities in North Carolina and Pennsylvania. Both are at the premium end.
Spyderco and Kershaw also make some models in the USA, as covered below.
CRKT: designed in Oregon, mostly made in Asia
CRKT was founded in 1994 and is known for working with outside designers, both custom makers and industrial designers, and putting their designs into affordable production. That business model depends on overseas manufacturing. Most CRKT knives are made in China or Taiwan, and the country is shown on the product page and usually on the knife.
CRKT also has a small range of knives made in the USA, which it markets separately. If US manufacturing matters to you, filter for those models. Don’t assume an Oregon company means an Oregon-made knife.
Being made in China doesn’t make a CRKT knife bad. CRKT’s appeal is interesting designs at low to moderate prices, and the overseas factories are a large part of how it keeps prices there.
Camillus: from a New York factory to an imported brand
The original Camillus Cutlery Company was a large American maker in Camillus, New York. Its roots go back to the late 1800s. It made pocket knives under its own name and for other brands and retailers. It also filled military contracts, including utility knives, combat knives and pilot survival knives. The company went into bankruptcy and the factory closed in 2007.
Acme United, a company that sells cutting tools and first aid products, bought the Camillus name after the closure. Camillus knives sold today are budget and mid-priced folders, fixed blades and outdoor tools, and they are made overseas, mainly in China.
That gives you a simple rule:
- Stamps such as “CAMILLUS NEW YORK U.S.A.” or “CAMILLUS CUTLERY CO.” point to the original New York factory.
- Current Camillus knives won’t say “Made in USA,” and the box will show where they were made.
Collectors care a lot about this difference. If you have an older one, see what a Camillus knife is worth.
Other old American names that moved production
Several famous American traditional brands went through a similar change:
- Schrade, Old Timer and Uncle Henry. These were made in New York by Imperial Schrade until it closed in 2004. The names were later sold, and most knives carrying them now are made in China. Our guide to Imperial and Schrade knives explains who made which knives and when.
- Imperial. Known for affordable working knives from Providence, Rhode Island, Imperial also ended up inside the Imperial Schrade business.
- Gerber. Based in Oregon, Gerber makes some models in the USA and imports many others.
China and Taiwan: wide range of quality
China now makes a very large share of the world’s pocket knives, and the quality varies widely. At the low end are unbranded gas-station knives with unknown steel. At the other end, factories in and around Yangjiang, in Guangdong province, make premium folders with titanium handles, powder steels and close tolerances.
WE Knife and its lower-priced sister brand Civivi are good examples of the high end. Many knife enthusiasts rate their fit and finish above some Western brands at similar prices. See are Civivi knives good? for a closer look. Kizer is another well-regarded Chinese maker.
Taiwan has a long history as a contract manufacturer for American brands. Spyderco, CRKT and Cold Steel, among others, have made models there. Taiwan-made knives generally have a good reputation for consistency.
Japan
The city of Seki, in Gifu Prefecture, is Japan’s best-known blade-making center. Spyderco has long made some of its best-known folders there, including the Delica and Endura. Fällkniven is a Swedish company, but its knives are made in Japan. Kershaw belongs to the Japanese KAI Group, which also makes Shun kitchen knives.
Europe: Germany, Switzerland, France, Sweden, Italy
- Germany. Solingen has made blades for centuries. Böker’s tree brand Manufaktur line, Otter-Messer and Hubertus all make pocket knives there. Böker also sells lines made outside Germany, so read Böker Tree Brand knives made in Germany before buying if German manufacture matters to you.
- Switzerland. Victorinox makes Swiss Army knives in Ibach, and it also makes some knives at the former Wenger site in Delémont. See knives made in Switzerland and where Swiss Army knives are made today.
- France. Opinel makes its simple wooden-handled folders in Savoie. See our Opinel guide. Laguiole-style knives are made by workshops in the village of Laguiole and in the cutlery town of Thiers. Many knives sold under the Laguiole name are made elsewhere, though, so read how to spot a genuine Laguiole knife.
- Sweden. Morakniv makes its fixed blades in Mora.
- Italy. The town of Maniago is home to makers such as Fox and LionSteel. Spyderco has also had models made in Italy.
There used to be other well-known German names, such as the Kissing Crane brand from Solingen. Their history is covered in are Kissing Crane knives collectible?
Does country of origin matter?
It depends on why you’re asking.
- Quality. Country is a weak signal on its own. A well-made Taiwanese or Chinese knife from a careful brand can be better than a poorly finished knife from anywhere else. The specific maker, the steel, the heat treatment and the quality control matter more.
- Price. Overseas production is usually cheaper, which is why budget lines are rarely made in the USA or Western Europe.
- Collecting. For vintage traditional knives, origin matters a great deal. An old US-made Camillus, Schrade or Imperial is a different item from a modern import carrying the same name.
- Personal preference. Some buyers simply want to support domestic manufacturing or avoid particular countries. If that’s you, our list of which knives are not made in China is a good starting point.
- Warranty and service. These depend on the brand, not the factory. Benchmade and Spyderco, for example, cover knives under their own warranty wherever the knife was made.
Quick reference: where major brands make their knives
This is a general guide to current production. Brands change suppliers, so always confirm the specific model.
| Brand | Where most current knives are made |
|---|---|
| Case | USA (Pennsylvania) |
| Buck | Mostly USA (Idaho) |
| Benchmade | USA (Oregon) |
| Spyderco | Mix of USA, Japan, Taiwan, China and Italy |
| Kershaw | Mix of USA and China |
| CRKT | Mostly China and Taiwan, a few USA |
| Gerber | Mix of USA and overseas |
| Camillus (current brand) | Overseas, mainly China |
| Schrade, Old Timer, Uncle Henry (current) | Mainly China |
| Civivi, WE Knife | China |
| Victorinox | Switzerland |
| Böker | Germany (Manufaktur line); China, Taiwan and others (Plus, Magnum); Argentina (Arbolito) |
| Opinel | France |
| Morakniv | Sweden |
| Fällkniven | Japan |
More on individual brands
If you’re comparing modern folders, Spyderco vs Benchmade compares two brands with very different manufacturing approaches. If you’re looking for French knives, which are the real Laguiole knives? names the workshops worth knowing.