Kitchen Knife Brands

Shun Knives: Steel, Edge Angle and Magnetic Racks

Are Shun knives magnetic, and what angle are they sharpened to? Learn Shun's steel, its 16-degree edge, safe magnetic storage, care and warranty.

On this page
  1. Quick answers
  2. Are Shun knives magnetic?
  3. What angle are Shun knives sharpened to?
  4. What steel do Shun knives use?
  5. Main Shun lines
  6. Sharpening and honing a Shun
  7. Can Shun knives go in the dishwasher?
  8. Warranty and sharpening service
  9. Which Shun knife is best to start with?

Quick answers

  • Are Shun knives magnetic? Yes. Shun blades are made from stainless steels that are attracted to magnets, so they work on magnetic strips and magnetic knife blocks.
  • What angle are Shun knives sharpened to? Most Shun kitchen knives are sharpened to about 16 degrees per side, or 32 degrees inclusive. Shun notes a few exceptions on some models, so check the product’s care information.
  • What steel do Shun knives use? Popular lines such as Classic and Premier use a VG-MAX core, typically clad in layered stainless steel. Other lines use VG10 or other steels.
  • Dishwasher? No. Shun recommends hand washing.

Are Shun knives magnetic?

Yes. Not all stainless steel is magnetic. Some types used in sinks and cookware aren’t. But the hardened stainless steels used for knife blades are, and that includes Shun’s VG-MAX and VG10 cores and the stainless cladding around them. A Shun will hold firmly on a magnetic strip, and Kai, the company that makes Shun, sells magnetic knife blocks of its own.

Using a magnetic strip or block safely

Shun blades are hard and thin, which makes the edge excellent at cutting but more prone to chipping if it strikes something hard. A few habits help:

  • Place the spine first. Touch the back of the blade to the strip, then roll the blade flat. Don’t let the edge snap onto the magnet.
  • Remove by rolling. Tilt the blade away by the spine and lift. Don’t drag the edge across the strip.
  • Choose a wood-faced strip or block if you can. Bare metal strips work, but wood is gentler on the edge and the finish.
  • Check the magnet strength. A very strong magnet can make the knife jump onto the strip. A weak one may let a heavy knife slip.
  • Mount it away from busy areas so knives can’t be knocked off.

Patterned Damascus finishes can pick up fine scuffs from repeated contact with metal strips. This doesn’t affect cutting, but wood surfaces help keep the finish looking new.

What angle are Shun knives sharpened to?

Shun sharpens most of its kitchen knives to 16 degrees on each side. That’s noticeably more acute than older German knives and a little more acute than many modern German knives. Shun also lists a few exceptions, such as models intended for heavier-duty work, so check the care page or packaging for your specific knife.

Per side vs inclusive

Edge angles are usually quoted per side. A double-bevel knife sharpened at 16 degrees per side has an inclusive angle of 32 degrees. When you set a guided sharpener or hold a knife on a whetstone, you’re working with the per-side figure.

In practice, holding roughly 15–17 degrees per side by hand will keep a Shun close to its factory edge. Holding a consistent angle matters more than hitting an exact number.

How Shun compares with German knives

A common related question is whether German knives are 15 or 20 degrees. Traditionally they were around 20 degrees per side, and some still are. Today, major German brands typically sharpen closer to 14–15 degrees per side (Wüsthof about 14, Zwilling about 15). Shun’s 16 degrees is in the same general range, but Shun pairs it with much harder steel, so the edge stays keen longer while being less tolerant of twisting or impact.

What steel do Shun knives use?

  • VG-MAX: Shun’s proprietary development of VG10, with added chromium and vanadium, used as the cutting core in the Classic and Premier lines. It’s typically hardened to around 60–61 HRC.
  • Layered cladding: in many Shun lines the hard core is sandwiched between layers of softer stainless steel, which creates the rippled “Damascus” look and supports the hard core.
  • VG10 and others: some lines, such as the lower-priced Sora, use a VG10 cutting edge. Others use different steels or constructions.

At 60–61 HRC, Shun steel is noticeably harder than the roughly 56–58 HRC of typical German knives. That’s why it holds a fine edge well and also why it’s more prone to chipping.

Main Shun lines

Line Key features Who it suits
Classic VG-MAX core, Damascus cladding, D-shaped dark handle The default Shun; most popular
Classic Blonde Classic blade with a light-coloured handle Classic in a lighter look
Premier VG-MAX core, hammered (tsuchime) finish, walnut-toned handle Those who want a slightly upscale look
Sora VG10 cutting edge on a lower-cost construction, textured handle A lower-priced entry to Shun
Kanso Simpler finish, no Damascus, rugged look People who prefer a plainer knife
Dual Core and others Specialist steels and premium finishes Enthusiasts

Shun’s lineup changes over time, so check the current range before buying.

Sharpening and honing a Shun

  • Honing: use a fine ceramic rod or a smooth honing steel with light pressure, at about the knife’s 16-degree angle. Shun sells its own honing steels with an angle guide. Avoid coarse, grooved steels, which can be harsh on hard edges. Our explainer on what honing a knife means walks through the technique.
  • Sharpening: whetstones work best. A medium stone (around 1000 grit) for sharpening and a finer stone for polishing suit most Shun knives. Shun advises against sharpening more often than needed, since it removes metal.
  • Avoid pull-through sharpeners set for German knives at around 20 degrees, and avoid aggressive electric grinders.

Can Shun knives go in the dishwasher?

No. Shun recommends hand washing and drying. Dishwasher heat, harsh detergent and knocking against other items can dull or chip the hard edge and damage the handle. Wash with warm, soapy water, rinse and dry straight away. The same applies to most quality knives, as we explain in can you put Wüsthof knives in the dishwasher.

Other care tips for hard Japanese blades:

  • Use wood or soft plastic boards. Avoid glass, stone and ceramic.
  • Don’t cut bones, frozen food or hard rinds with a thin blade.
  • Avoid twisting the blade or using it to pry.

Warranty and sharpening service

Shun offers a limited lifetime warranty against defects in materials and workmanship. It doesn’t cover misuse, such as chips from bones or drops. In the US, Shun has also offered a free sharpening service for its knives. Check Shun’s website for current terms, including any shipping costs.

Which Shun knife is best to start with?

For most people, an 8-inch Shun Classic chef’s knife is the natural starting point. A Classic or Premier santoku suits those who prefer a shorter, flatter blade. If budget is tight, Sora offers a lower-priced way into the brand.

Wondering what’s better than Shun? That depends on what you value. Miyabi generally offers harder, thinner blades. See our Miyabi vs Shun comparison. Hand-made knives from smaller Japanese makers can also outperform Shun in specific areas. For how Shun sits alongside German and budget brands, see our kitchen knife brands comparison.

The complete guide to kitchen knife brands

Kitchen Knife Brands Compared: Wüsthof, Henckels and More
Read the guide

Keep exploring

Guides from other topics

All topics →