Pocket Knife Brands

Spyderco vs Benchmade: Which Pocket Knife Brand Is Better?

Spyderco vs Benchmade compared: design, cutting performance, locks, steels, prices, where they're made, warranty and which brand suits your carry.

On this page
  1. The short answer
  2. The two brands in brief
  3. Design philosophy and cutting performance
  4. Opening and locks
  5. Steels
  6. Price range
  7. Where they’re made
  8. Warranty, sharpening and customization
  9. Popular models to compare
  10. Side-by-side summary
  11. Which should you buy?

The short answer

Neither brand is better across the board. They’re built around different priorities:

  • Spyderco is usually the pick if you care most about cutting performance, ergonomics, steel choice and price range. Its knives tend to have thin, slicey blades and distinctive, very functional shapes, and the catalog runs from budget to premium.
  • Benchmade is usually the pick if you want slim, clean-looking knives, the ambidextrous AXIS lock, US manufacturing and factory customization. Most of its line is mid-priced to premium.

Many knife users end up owning both. The right choice depends on which features you value and how you carry.

The two brands in brief

Spyderco was founded in 1976 by Sal and Gail Glesser and is based in Golden, Colorado. It’s credited with popularizing several features now common on modern folders, including the pocket clip, the round thumb hole for one-handed opening and widespread use of serrated edges. It works with many custom makers on collaboration designs.

Benchmade grew out of a balisong (butterfly knife) business founded in the late 1970s and is based in Oregon City, Oregon. It’s best known for the AXIS lock and for widely carried knives such as the Griptilian and the Bugout.

Design philosophy and cutting performance

Spyderco designs often put function ahead of conventional looks. Many models use full-flat grinds, leaf-shaped blades and large finger choils, which make them excellent slicers and give a secure grip. Some people find the looks odd. Fans tend to value how they cut and handle.

Benchmade designs are generally more conventional and slimmer. Drop points, clip points and reverse tantos are common, and many models carry very easily in a pocket. Blade grinds vary by model. Some, such as the Bugout, are thin and good slicers, while others are built more for tip strength and general utility.

Opening and locks

  • Spyderco: Most models open with the Spyderhole, the round hole in the blade. Locks include the back lock (lockback), the Compression Lock found on the Para Military 2 and other models, liner locks and others. The Compression Lock is popular because it’s strong and lets the blade drop closed easily once released.
  • Benchmade: Most models use thumb studs and the AXIS lock, a spring-loaded crossbar that slides in a slot. It’s fully ambidextrous and allows fast one-handed closing. It relies on small omega springs, which very occasionally break; Benchmade replaces them under warranty. Benchmade also uses other locks on some models.

If you’re left-handed, both brands offer good options. Spyderco often has reversible clips and symmetric designs, and the AXIS lock is ambidextrous by nature.

Steels

Both brands use well-regarded modern steels, and both have used premium powder steels such as S30V, S45VN, S90V and MagnaCut on various models.

Spyderco is known for an unusually wide variety of steels, including limited Sprint Run models that let enthusiasts try uncommon steels. Its budget models made in China use less expensive steels.

Benchmade’s catalog is more focused. Many popular models use a small group of steels at each price level, with premium steels on higher-end and Gold Class models.

Price range

  • Spyderco covers a very wide range. China-made models such as the Tenacious and the Byrd line are at the budget end. Japan-made classics such as the Delica and Endura sit in the middle. US-made and collaboration models such as the Para Military 2 sit higher.
  • Benchmade starts higher. Most of its catalog sits in the mid-to-premium bracket, and premium materials and Gold Class knives cost considerably more.

If your budget is tight, Spyderco gives you more choice.

Where they’re made

  • Benchmade makes almost all of its knives in Oregon City, Oregon.
  • Spyderco makes knives in several countries: Golden, Colorado (USA), Seki (Japan), Taiwan, China and Italy, depending on the model. The country is marked on the knife.

If you specifically want US-made, every Benchmade qualifies, while with Spyderco you need to pick the Golden-made models. See where pocket knife brands are made for more on this.

Warranty, sharpening and customization

  • Benchmade offers a lifetime warranty against manufacturing defects, the LifeSharp program for factory sharpening, and an online Custom Shop where you can choose colors, steels and other options on some models.
  • Spyderco also offers a warranty against manufacturing defects and a factory sharpening service. It doesn’t have a build-to-order shop like Benchmade’s. Instead it releases limited variants and Sprint Runs, and there’s a large aftermarket of scales and clips for popular models.

Check each company’s current terms before you buy, as warranty and service details can change.

Use Spyderco Benchmade
Lightweight everyday carry Delica 4, Endura 4 Bugout, Mini Bugout
All-round mid-size folder Para Military 2, Manix 2 Griptilian, Mini Griptilian
Budget entry point Tenacious, Byrd models Few true budget options
Premium Collaboration and Sprint Run models Gold Class, premium-steel variants

Side-by-side summary

Spyderco Benchmade
Strengths Cutting performance, ergonomics, steel variety, wide price range Slim carry, AXIS lock, US manufacturing, customization
Typical opening Round thumb hole Thumb studs
Signature locks Compression Lock, back lock AXIS lock
Manufacturing USA, Japan, Taiwan, China, Italy USA (Oregon)
Price range Budget to premium Mid to premium
Looks Functional, sometimes unusual Clean, conventional

Which should you buy?

  • Pick Spyderco if you mainly cut things such as boxes, food, rope and cord, and want the best slicing for your money. Also pick it if you want an unusual steel, or if you have a tight budget.
  • Pick Benchmade if you want a slim, conventional-looking knife made in the USA, you love one-handed ambidextrous closing, or you want to customize your knife.
  • If you’re unsure, handle both. A Delica or Para Military 2 and a Bugout or Griptilian cover each brand’s core strengths and are widely stocked.

Want a cheaper alternative to both? See are Civivi knives good? for a look at one of the most popular budget brands.

The complete guide to pocket knife brands

Where Pocket Knife Brands Are Made: USA, China and Beyond
Read the guide

Keep exploring

Guides from other topics

All topics →