EDC and Pocket Knives

Assisted Opening Knives Explained

How assisted opening (speed assist) knives work, how they differ from automatics, common brand systems like SpeedSafe, pros and cons, safety, and legal notes.

On this page
  1. What is an assisted opening knife?
  2. How the mechanism works
  3. Assisted vs automatic vs manual
  4. Brand names for assisted opening
  5. Pros and cons
  6. Safety features: tip locks and carry
  7. Are assisted opening knives legal?
  8. Care and maintenance
  9. Is an assisted opener right for you?

What is an assisted opening knife?

An assisted opening knife, sometimes called a “speed assist” or “spring assisted” knife, is a folding knife with a spring that helps the blade finish opening. You start the blade moving yourself by pushing a flipper tab or thumb stud. Once it passes a certain point, the spring snaps it the rest of the way open.

The key point is that you begin the opening by applying pressure to the blade. There’s no button or switch that releases a stored spring. That’s what separates an assisted opener from an automatic knife or switchblade.

How the mechanism works

Designs vary, but most assisted openers combine two things:

  1. A spring. Often a torsion bar or coil spring that is under tension when the blade is closed.
  2. A bias toward closure. The spring or a detent holds the blade closed until you push it partway open. Up to that point, the spring is actually working against you.

As you push the flipper or thumb stud, you overcome that resistance. Past the tipping point, the spring’s force flips direction and drives the blade open until the lock engages. Most assisted openers then lock with a liner lock or frame lock. For how those work, see pocket knife lock types explained.

Assisted vs automatic vs manual

Type How it opens Spring involvement
Manual folder You open the blade the whole way yourself, often with a flipper, thumb stud or thumb hole None; a detent may hold it closed
Assisted opener You start the blade moving; a spring finishes the job Spring helps after you move the blade
Automatic (switchblade, OTF) A button or switch releases a spring that opens the blade Spring does all the work

Modern manual flippers that run on bearings can open almost as fast as assisted knives, using a strong detent and a flick of the finger. If you’re weighing openers, see flipper vs thumb stud vs thumb hole.

Brand names for assisted opening

Several brands market their assisted systems under their own names:

  • Kershaw SpeedSafe. Associated with designer Ken Onion, who helped popularize assisted opening in production knives. The Kershaw Leek and Blur are long-running SpeedSafe models.
  • Smith & Wesson M.A.G.I.C. Used on many of S&W’s budget-friendly M&P and tactical-style folders.
  • CRKT Outburst. Used on some CRKT folders.
  • Benchmade AXIS Assist. Benchmade has offered assisted versions of some models that pair the assist with its AXIS crossbar lock.

Exact model availability changes over time, so check current listings.

Pros and cons

Pros

  • Fast, consistent one-handed opening
  • Opens fully with little effort, which helps with gloves or limited hand strength
  • Satisfying action that many people enjoy

Cons

  • An extra spring and parts that can wear, break or lose tension
  • The blade may open more forcefully than you expect, so it needs attentive handling
  • Sometimes treated with suspicion, or restricted, in places with strict knife rules
  • Usually a little harder to take apart and service than a simple manual folder

Safety features: tip locks and carry

Because a light push can start an assisted blade moving, some models include a tip lock or safety slider. This is a small switch near the tip end of the handle that keeps the blade closed until you disengage it. The Kershaw Leek is a well-known example. If your knife has one, use it when the knife is in your pocket.

Other good habits:

  • Carry the knife clipped securely, not loose in a pocket or bag where something could press the flipper.
  • Keep fingers clear of the blade path when opening.
  • Close the knife deliberately, with your fingers out of the way, after releasing the lock.

In the United States, the federal switchblade law was amended in 2009 to clarify that knives with a spring, detent or other mechanism that biases the blade toward closure, and that need the user to apply pressure to the blade to open, are not switchblades under that federal act. In practice, that covers typical assisted openers.

Federal law isn’t the only layer, though. State, city and international laws vary, and some places restrict assisted openers, one-handed opening knives or certain blade lengths. Read how knife blade length is measured and check your local laws before carrying. This article isn’t legal advice.

Care and maintenance

  • Keep it clean. Lint and grit in the pivot or spring channel can slow the action or stop the blade from opening fully. Blow out debris and wipe the blade after messy jobs.
  • Lubricate lightly. A drop of knife pivot oil at the pivot helps. Too much attracts dirt.
  • Check pivot tension. If the blade feels sluggish or gritty, the pivot may be too tight or dirty. If it wobbles, it may be loose. Adjust carefully, if your warranty allows.
  • Replace springs if needed. Some manufacturers sell replacement springs or will service the knife under warranty. Contact them before taking the knife apart yourself.

Is an assisted opener right for you?

An assisted opener suits you if you want quick, effortless one-handed opening and don’t mind a little extra mechanism. If you prefer simplicity, easy servicing, or carry somewhere with strict rules, a manual folder may be the better choice. Our roundup of the best EDC knives includes both kinds.

The complete guide to edc and pocket knives

Best EDC Knives: Top Everyday Carry Picks
Read the guide

Keep exploring

Guides from other topics

All topics →