EDC and Pocket Knives

How Knife Blade Length Is Measured (and Why It Matters Legally)

How blade length is measured (tip to handle, cutting edge, overall), why specs may differ from the law, and which knife features laws commonly restrict.

On this page
  1. Are knives measured by blade length?
  2. Common ways blade length is measured
  3. Why manufacturer specs may not match the law
  4. How to measure your own knife
  5. Why blade length matters legally
  6. Other features laws look at
  7. What is the standard size of a knife?
  8. Do knives count as blades?
  9. What is the most illegal knife to own?
  10. What is a rule 9 knife?
  11. How to check the rules where you live

Are knives measured by blade length?

Usually, yes. When knives are described for sale or regulated by law, the blade length is normally the key measurement, not the overall length of the knife. The catch is that “blade length” doesn’t have one universal definition. Some sources measure from the tip to where the blade meets the handle, some measure only the sharpened edge, and some laws spell out their own method. The same knife can therefore have slightly different “lengths” depending on who is measuring.

This article is general information, not legal advice. Knife laws vary by country, state and city and change over time. Check the current law where you live and where you’ll travel.

Common ways blade length is measured

Tip to handle (or guard)

The most common everyday method is to measure in a straight line from the point of the blade to the front of the handle, or to the guard or bolster on knives that have one. This includes any unsharpened section near the handle. Many manufacturers list blade length this way, though not all do.

Cutting edge length

Some laws and some manufacturers measure only the sharpened edge, from the tip to where the sharpening stops. This is usually a bit shorter than tip-to-handle length, because many blades have an unsharpened ricasso or choil near the handle. On a curved blade, cutting edge length may be measured in a straight line from end to end, or along the curve, depending on the definition used.

Overall length

Overall length is the full knife, blade plus handle, when open. It matters for some rules and for whether a knife fits a pocket or sheath. Blade-length limits, though, are usually about the blade itself.

Why manufacturer specs may not match the law

A knife listed as “3.0 inches” might measure a little more or less under a particular law’s definition. Common reasons:

  • the manufacturer measured cutting edge, but the law measures tip to handle, or the other way round
  • the listed figure was rounded
  • the blade has a long unsharpened section near the handle
  • the figure was taken along the curve rather than in a straight line

If you’re close to a legal limit, measure the knife yourself using the method your local law specifies. Or choose a knife with a comfortable margin below the limit.

How to measure your own knife

  1. Open the knife fully and make sure it’s locked, or hold it safely if it doesn’t lock.
  2. Lay it flat with the edge facing away from you.
  3. Using a rigid ruler, measure in a straight line from the very tip to the front of the handle (or guard). This is the tip-to-handle length.
  4. Measure from the tip to where the sharpened edge ends. This is the cutting edge length.
  5. Note both, and compare them with how your local law defines blade length.

Why blade length matters legally

Many knife laws set limits on blade length, either for carry in general or for carry in certain places. Some examples:

  • United Kingdom. It’s generally an offense to carry a bladed article in public without good reason or lawful authority. There’s an exception for folding pocket knives whose cutting edge doesn’t exceed 3 inches, but locking knives don’t qualify for that exception, whatever their length. Specific types of knives are banned outright.
  • United States. There’s no single national limit for everyday carry. Rules come mainly from states and sometimes cities, and they differ a lot. Some states set blade length thresholds for certain types of carry or certain places. Others have few length limits. Several states have relaxed or repealed older knife restrictions in recent years.
  • Other countries use their own definitions and limits, sometimes combined with rules about locking blades or one-handed opening.

Restricted places such as schools, courthouses, government buildings and airports often have stricter rules regardless of general carry law. For air travel specifically, see can you bring a pocket knife on a plane?.

Other features laws look at

Blade length is only one factor. Depending on where you are, laws may also consider:

  • Opening mechanism. Automatic knives (switchblades), gravity knives and butterfly knives (balisongs) are restricted in some places. Assisted openers are treated differently from automatics in some laws. See assisted opening knives explained.
  • Locking blades. Some jurisdictions, like the UK, treat locking knives differently from non-locking ones. For lock types, see pocket knife lock types explained.
  • Fixed vs folding. Fixed blades, especially when concealed, are often more restricted. See fixed vs folding knives.
  • Blade design. Double-edged blades and daggers are restricted in some places.
  • Concealment and intent. How a knife is carried, and why, can matter as much as what it is.

What is the standard size of a knife?

There’s no legal “standard” size. As a rough guide, many everyday pocket knives have blades of about 2.5 to 3.5 inches. Compact EDC folders are often under 3 inches, and larger “hard use” folders may be 4 inches or more. Kitchen knives are a different category. Chef’s knives commonly have blades of about 6 to 10 inches. For EDC examples at various sizes, see best EDC knives.

Do knives count as blades?

In everyday speech and in many laws, yes. A knife is a bladed tool, and legal phrases like “bladed article” or “bladed weapon” generally include knives. The exact definition, and which items are excluded, depends on the specific law.

What is the most illegal knife to own?

There’s no single answer, because what’s banned varies by jurisdiction. Some places ban only carrying certain knives, while others also ban owning or selling them. Types that are commonly restricted somewhere include:

  • automatic knives (switchblades), including out-the-front (OTF) knives
  • gravity knives
  • butterfly knives (balisongs)
  • ballistic knives, which fire the blade as a projectile
  • disguised knives, such as belt-buckle, cane or lipstick knives
  • push daggers and certain double-edged daggers
  • knives combined with knuckle dusters

If you’re considering any of these, check your local law carefully first.

What is a rule 9 knife?

“Rule 9” isn’t a legal term. The phrase is best known from the TV series NCIS, where Leroy Jethro Gibbs keeps a list of personal rules. Rule #9 is usually quoted as “never go anywhere without a knife.” Fans use “rule 9 knife” to mean a knife you always carry, essentially an EDC knife. It has no effect on what’s legal to carry.

How to check the rules where you live

  • Read the official statute or government guidance for your country, state or province. Search official sites rather than forums.
  • Check city or county rules, which may be stricter than state rules.
  • Look up rules for specific places you visit often, such as workplaces, schools, public transport and government buildings.
  • When traveling, check the destination’s laws before you go.
  • If you’re unsure, ask a qualified local lawyer, or choose a small, non-locking, manually opened knife, which tends to be the least restricted option in many places.

The complete guide to edc and pocket knives

Best EDC Knives: Top Everyday Carry Picks
Read the guide

Keep exploring

Guides from other topics

All topics →