Kitchen Knife Types

What are the 11 basic knife cuts?

The 11 basic knife cuts explained, from brunoise and julienne to chiffonade and tourné, with standard sizes, uses and which knife to use for each.

On this page
  1. Short Answer
  2. The 11 Cuts at a Glance
  3. The Cuts Explained
  4. How the Stick and Dice Cuts Build on Each Other
  5. Other Cuts You’ll See
  6. What Are the Five Basic Knife Cuts?
  7. Which Knife to Use
  8. Tips for Safe, Even Cuts

Short Answer

There’s no single official list, but the 11 basic knife cuts most often taught in culinary training are:

  1. Large dice
  2. Medium dice
  3. Small dice
  4. Brunoise
  5. Batonnet
  6. Julienne (sometimes called allumette)
  7. Paysanne
  8. Chiffonade
  9. Mince
  10. Rondelle
  11. Tourné

Some lists swap in other cuts, such as a rough chop, fine brunoise, fine julienne, a bias cut or an oblique (roll) cut. The standard sizes below are the ones commonly used in Western culinary schools, but you’ll see small differences between textbooks and schools.

The 11 Cuts at a Glance

Cut Shape Typical size Common uses
Large dice Cube 3/4 in (about 2 cm) Stews, roasted vegetables, stocks
Medium dice Cube 1/2 in (about 1.25 cm) Soups, hashes, side dishes
Small dice Cube 1/4 in (about 6 mm) Salsas, sauces, fillings
Brunoise Tiny cube 1/8 in (about 3 mm) Garnishes, fine sauces, consommé
Batonnet Stick 1/4 × 1/4 in, about 2 to 2.5 in long (6 mm × 6 mm × 5 to 6 cm) Crudités, stir-fries, the starting point for small dice
Julienne / allumette Thin stick 1/8 × 1/8 in, about 2 to 2.5 in long (3 mm × 3 mm × 5 to 6 cm) Salads, slaws, garnishes, stir-fries
Paysanne Thin, flat piece About 1/2 × 1/2 × 1/8 in (1.25 cm × 1.25 cm × 3 mm) Rustic soups, quick-cooking vegetables
Chiffonade Thin ribbon Fine strips of leaves Basil, mint, lettuce, spinach
Mince Very fine, irregular As small as practical Garlic, shallots, herbs, ginger
Rondelle Round disc Thickness to suit the recipe Carrots, cucumbers, zucchini, sausages
Tourné Seven-sided barrel About 2 in long (5 cm) Classic French potato and root vegetable garnish

The Cuts Explained

Large, Medium and Small Dice

Dice are even cubes. The size you choose depends on cooking time and texture: larger cubes for long, slow cooking, smaller ones where you want the vegetable to soften quickly or blend into a dish. The main reason for cutting evenly is that same-sized pieces cook at the same rate.

Brunoise

Brunoise is a very small dice, about 1/8 inch (3 mm). It’s made by cutting a julienne and then cutting across the sticks. It’s often used as a garnish or in sauces where you want flavor and color without big pieces. A fine brunoise is half that size again, about 1/16 inch (1.5 mm).

Batonnet

A batonnet is a stick about 1/4 inch square and 2 to 2.5 inches long. It’s a useful cut in its own right, for crudités or stir-fries, and it’s also the step before a small dice.

Julienne (and Allumette)

A julienne is a thin matchstick about 1/8 inch square and 2 to 2.5 inches long. “Allumette” means matchstick in French; some sources use it as another name for julienne, while others use it for a slightly thicker cut or specifically for matchstick potatoes. A fine julienne is thinner still, about 1/16 inch.

Paysanne

Paysanne (“country style”) is a thin, flat cut, usually squares, rounds or triangles about 1/2 inch across and 1/8 inch thick. It follows the shape of the vegetable more than the other cuts do and suits rustic soups and vegetables that need to cook quickly.

Chiffonade

Chiffonade is for leaves. Stack them, roll them tightly into a cigar shape, then slice across the roll to make fine ribbons. Use a very sharp knife and a single smooth slicing stroke, especially with basil, which bruises and darkens if you crush it.

Mince

Mincing produces very small, irregular pieces. It’s used mostly for aromatics such as garlic, shallots, ginger and herbs. A common method is to slice or roughly chop, then rock the knife back and forth over the pile, holding the tip down with your other hand.

Rondelle

Rondelles are round slices cut straight across cylindrical vegetables like carrots, cucumbers and zucchini. Cutting at an angle instead gives an oval bias cut, which exposes more surface area and looks attractive in stir-fries.

Tourné

The tourné is a classic French cut: a small barrel shape, about 2 inches long, with seven even sides and flat ends. It’s traditionally done on potatoes, carrots and other root vegetables, often with a curved bird’s beak paring knife. It takes practice and wastes some of the vegetable, so it’s mostly used in restaurants and culinary training. For more on paring knife styles, see what is a paring knife used for?

How the Stick and Dice Cuts Build on Each Other

Most of the precise cuts come from the same sequence:

  1. Square off the vegetable by trimming the rounded sides so it sits flat and stable.
  2. Cut planks of the thickness you want (1/8 inch, 1/4 inch, and so on).
  3. Stack the planks and cut them into sticks of the same width. 1/4 inch sticks are batonnet; 1/8 inch sticks are julienne.
  4. Line up the sticks and cut across them at the same width to make cubes. Batonnet becomes small dice; julienne becomes brunoise.

Medium and large dice follow the same pattern using thicker planks.

Other Cuts You’ll See

  • Chop (rough chop): pieces of about the same size but not uniform shape, for dishes where appearance doesn’t matter, such as stocks or blended soups.
  • Bias cut: a diagonal slice through a long vegetable.
  • Oblique or roll cut: cut on a diagonal, roll the vegetable a quarter turn, and cut again. This gives chunky, angled pieces with lots of surface area.
  • Pont-neuf: a thick stick, often around 1/2 inch square, traditionally used for thick-cut fries.

What Are the Five Basic Knife Cuts?

When people talk about five basic cuts, they usually mean the core skills most home cooks use: chop, dice, mince, slice and julienne. Some lists include chiffonade instead of slice. Learn those first, then move on to the more precise culinary cuts above.

Which Knife to Use

  • Chef’s knife (or santoku or gyuto): most dice, batonnet, julienne, brunoise, paysanne, chiffonade and mince. See gyuto vs Western chef’s knife for how the two main styles feel.
  • Nakiri: fast, even push cuts on vegetables, especially julienne and slices. See santoku vs nakiri.
  • Paring or bird’s beak knife: tourné, and small jobs like mincing a single garlic clove or shallot.

Our guide to kitchen knife types covers each of these knives in more detail.

Tips for Safe, Even Cuts

  • Use a sharp knife. A dull blade slips and needs more force.
  • Make the food stable. Cut a flat side first so round vegetables don’t roll.
  • Use the claw grip. Curl the fingertips of your guiding hand under, with the knuckles resting against the flat of the blade. This keeps your fingertips out of the way and helps control the thickness of each cut.
  • Anchor your board. A damp towel or non-slip mat underneath stops it sliding.
  • Go slowly at first. Consistency comes before speed. Even cuts at a slow pace are better than fast, uneven ones.

The complete guide to kitchen knife types

Types of Kitchen Knives and Their Uses
Read the guide

Keep exploring

Guides from other topics

All topics →