Kitchen Knife Types

Do Serrated Knives Cut Better? Serrated vs Straight Edges

Serrated knives cut some foods better and others worse. Learn how each edge works, which to use for bread, tomatoes and steak, and how they differ to sharpen.

On this page
  1. The Short Answer
  2. How a Serrated Edge Cuts
  3. How a Straight Edge Cuts
  4. Where Serrated Knives Do Better
  5. Where Straight Edges Do Better
  6. Serrated vs Straight: Task by Task
  7. Are Serrated Steak Knives Better Than Non-Serrated?
  8. Which Knife Is Best for Cutting Bread?
  9. Types of Serration
  10. Sharpening and Lifespan
  11. Partially Serrated Pocket Knives
  12. Bottom Line

The Short Answer

Serrated knives cut some things better, not everything. They’re better at foods with a hard, slippery or tough outside and a soft inside, like crusty bread, tomatoes and citrus, and at sawing through fibrous material like rope. They also tend to keep cutting for longer before they feel dull.

Straight (plain) edges are better at almost everything else in the kitchen: chopping, dicing, mincing, push cuts and clean slices. They leave a smoother cut surface and are much easier to sharpen.

That’s why most cooks keep both: a straight-edged chef’s knife and paring knife for prep, plus a serrated bread knife. Our guide to kitchen knife types covers where each fits.

How a Serrated Edge Cuts

A serrated edge has a row of teeth with curved hollows (gullets) between them. Two things make it work:

  • Focused pressure. At first, only the points touch the food, so your effort is concentrated on a few small spots. That helps the blade bite into a surface a smooth edge would slide over, like a firm bread crust or a taut tomato skin.
  • Sawing action. Moving the blade back and forth drags each tooth through the material, tearing and cutting at once. You need less downward pressure, so soft interiors don’t get squashed.

There’s a durability bonus too. The recessed edges inside the gullets don’t touch the cutting board or plate much, so they stay sharp even after the points have worn. That’s a large part of why serrated knives seem to “stay sharp longer”.

How a Straight Edge Cuts

A straight edge is one continuous, very thin cutting line. When it’s sharp, it separates food along a clean path with little tearing. You can push it straight down, slide it forward or back, or rock it on the board, and the whole length of the edge does useful work.

The downside is that a straight edge depends on being sharp. Once it dulls, it starts to slip on skins and crush soft foods. A sharp straight edge slices tomatoes beautifully; a dull one squashes them.

Where Serrated Knives Do Better

  • Crusty bread and baguettes. The teeth bite through the crust without compressing the crumb.
  • Soft bread and cakes. A gentle sawing motion avoids squashing them.
  • Tomatoes, peaches, plums and citrus. Teeth catch on slippery skins.
  • Large produce with tough rinds, such as melons, pineapple and winter squash, if the blade is long enough.
  • Cutting on a plate. Steak knives meet ceramic constantly, and serrations keep working after a straight edge would have dulled.
  • Rope, cord, cardboard and fabric (mostly a pocket knife concern).

Where Straight Edges Do Better

  • Chopping and dicing vegetables. Push cuts and rocking need a continuous edge that meets the board along its length.
  • Mincing herbs and garlic. Serrations tear and bruise them.
  • Clean slices of meat and fish, raw or cooked. A sharp straight edge leaves a smoother surface with less shredding.
  • Precision work such as peeling, trimming and scoring.
  • Anything you want to sharpen easily at home.

Serrated vs Straight: Task by Task

Task Better edge Why
Crusty bread Serrated Teeth bite the crust without crushing the inside
Soft sandwich bread Serrated Sawing needs little downward pressure
Tomatoes Either, if sharp Serrated works even when slightly dull; a very sharp straight edge cuts cleaner
Onions, carrots, peppers Straight Clean push cuts and chopping
Herbs Straight Serrations tear and bruise leaves
Raw meat and fish Straight Cleaner cuts, less shredding
Cooked roasts and brisket Usually straight A long, sharp slicer gives the neatest slices; serrated carving knives suit crusty exteriors
Steak at the table Either See below
Cake layers Serrated Even sawing with little pressure
Rope or cord Serrated Teeth grip and saw through fibers

Are Serrated Steak Knives Better Than Non-Serrated?

It depends on what you care about:

  • Serrated steak knives keep cutting for a long time, even after years of contact with plates, and need little attention. The trade-off is a slightly rougher cut and more sawing.
  • Plain-edge steak knives cut more cleanly and feel more refined when sharp, but plates dull them, so they need sharpening more often. They’re much easier to sharpen than serrated knives, though.

If you want low maintenance, serrated is the practical choice. If you enjoy a clean cut and don’t mind sharpening, choose plain edges. Either way, a thick, well-seared steak is easy to cut with any sharp knife.

Which Knife Is Best for Cutting Bread?

A serrated bread knife with a blade of at least 8 inches, and ideally 9 to 10 inches. A blade longer than the loaf is wide lets you use long, smooth strokes rather than short, crushing ones. For crusty sourdough, let the teeth do the work and saw gently instead of pushing down.

Types of Serration

Not all serrated edges are the same:

  • Scalloped edges have rounded, wave-like teeth. They’re common on bread knives and tend to leave a slightly cleaner cut with fewer crumbs.
  • Pointed serrations have sharper, more aggressive teeth that bite quickly into hard crusts and tough skins. They can tear more.
  • Micro-serrated edges have very fine teeth, often on cheap steak knives and knives sold as “never needs sharpening”. They keep tearing through food after the edge has worn, but they don’t cut as cleanly as a sharp straight edge and usually can’t be sharpened.

Sharpening and Lifespan

Straight edges dull faster in use but are easy to maintain with a honing rod, whetstone or most pull-through sharpeners.

Serrated edges keep cutting for longer, but when they do need sharpening, it’s more work: each gullet has to be done separately with a tapered rod, or you send the knife to a professional. We cover the options in can you sharpen a serrated knife with a regular knife sharpener?

Partially Serrated Pocket Knives

Many pocket knives have a straight edge near the tip and serrations near the handle. The idea is to give you clean cutting with the front of the blade and sawing power for rope or strapping near the handle. Some people like that; others find it leaves them with a shorter plain edge for everyday tasks and an awkward section to sharpen. If most of your cutting is opening boxes, food and general tasks, a fully plain edge is often easier to live with.

Bottom Line

Serrated knives don’t cut better in general. They cut certain things better, mainly bread, foods with tough or slippery skins, and anything cut on a hard surface. For everyday chopping and slicing, a sharp straight edge is cleaner, more versatile and easier to keep sharp.

The complete guide to kitchen knife types

Types of Kitchen Knives and Their Uses
Read the guide

Keep exploring

Guides from other topics

All topics →