Kitchen Knife Brands

Miyabi vs Shun: Which Japanese-Style Brand Is Better?

Miyabi vs Shun compared: steel hardness, edge angles, chipping risk, handles, price and service, plus line-by-line matchups to help you choose the right one.

On this page
  1. The short answer
  2. At a glance
  3. Who makes them
  4. Steel and hardness
  5. Edge angle and blade geometry
  6. Durability and chipping
  7. Handles and feel
  8. Matching lines by budget
  9. Sharpening, service and warranty
  10. Which should you buy?

The short answer

Neither brand is better for everyone. They aim at slightly different cooks:

  • Miyabi generally uses harder steel and thinner edges. Its popular lines run around 61–63 HRC, with edges of roughly 9.5–12 degrees per side. Expect exceptional sharpness and edge retention, but more risk of chipping and a higher price.
  • Shun generally uses slightly softer steel and a less acute edge, around 60–61 HRC and about 16 degrees per side. It’s very sharp but more forgiving, often cheaper at entry level, and backed by a sharpening service in the US.

If this is your first Japanese-style knife, or you sometimes rock-chop, Shun is usually the easier choice. If you’re comfortable with careful technique and want the keenest edge, Miyabi is worth the premium.

At a glance

Shun Miyabi
Owner Kai Group Zwilling J.A. Henckels group
Made in Seki, Japan Seki, Japan
Typical core steels VG-MAX, VG10 SG2 (MC63), FC61, others
Typical hardness ~60–61 HRC ~61–63 HRC (some lines higher)
Typical edge angle ~16° per side ~9.5–12° per side
Handle styles Mostly D-shaped D-shaped, Japanese-style and Western-style, depending on line
Character Sharp, more forgiving Extremely sharp, more delicate
Entry price Generally lower Generally higher

Line specs vary, so check the exact knife you’re considering.

Who makes them

Both brands are made in Seki City, Japan, a town with a long blade-making tradition.

  • Shun is made by Kai, a Japanese company that makes a wide range of blades, from razors to kitchen knives. Shun has been widely sold in the US since the early 2000s.
  • Miyabi is owned by the German company Zwilling, which makes Miyabi knives at its factory in Seki. The knives are Japanese-made, with Zwilling’s own heat-treatment processes.

Steel and hardness

Shun’s core lines (Classic and Premier) use VG-MAX, Kai’s development of VG10, at about 60–61 HRC. The lower-priced Sora line uses VG10 at the edge.

Miyabi’s lines vary more:

  • SG2 / MC63 powder steel, around 63 HRC, in lines such as Birchwood and Artisan.
  • FC61, around 61 HRC, in lines such as Kaizen II and Koh.
  • Some premium lines use even harder steels.

Harder steel holds a fine edge longer. The trade-off is that it’s more brittle.

Edge angle and blade geometry

Shun sharpens most of its knives to about 16 degrees per side. Miyabi grinds many knives considerably more acutely, at roughly 9.5–12 degrees per side, and its blades are often thinner behind the edge.

The result is that Miyabi knives tend to glide through food with less resistance, which is especially noticeable on push cuts and when slicing. Shun’s slightly more robust edge copes better with rocking, occasional contact with harder foods and less-than-perfect technique. Read more on Shun’s angle in our Shun knives guide.

Durability and chipping

Both brands’ knives are hard, thin Japanese-style blades that can chip if misused. Miyabi’s harder, thinner edges are generally more prone to chipping.

To protect either brand:

  • Use wood or soft plastic boards. Never glass, stone or ceramic.
  • Don’t cut bones, frozen food or very hard squash with a thin blade.
  • Avoid twisting the blade or scraping the board with the edge.
  • Hand wash and dry. No dishwasher.

Handles and feel

Shun mostly uses D-shaped handles, which suit a pinch grip and feel secure. D-shaped handles are oriented for right-handed users. Shun offers left-handed versions of some models, but not all.

Miyabi offers a wider mix of handles: D-shaped (Birchwood, Artisan, Kaizen II), traditional Japanese-style, and Western-style handles on some lines (such as Koh and Evolution). Many Miyabi knives feel lighter and more blade-forward.

If you prefer a German-style handle with a Japanese blade, Miyabi’s Western-handled lines are worth a look.

Matching lines by budget

Budget Shun Miyabi
Entry Sora Koh
Mid-range Classic, Classic Blonde Kaizen II, Evolution
Upper Premier, Dual Core Artisan, Birchwood
Top Shun premium and limited lines Miyabi’s hardest-steel lines (such as Black)

These pairings are approximate. Prices move around a lot with sales.

Sharpening, service and warranty

  • Shun: limited lifetime warranty against defects. In the US, Shun has offered a free sharpening service. Check current terms and shipping costs on Shun’s website.
  • Miyabi: covered by Zwilling’s warranty against manufacturing defects. Check Zwilling’s site for current terms and any sharpening services.

Both brands sharpen best on whetstones. Match each knife’s angle: about 16 degrees per side for Shun, lower for most Miyabi. Hone with a ceramic or fine rod and light pressure. See what honing a knife means.

Which should you buy?

Choose Shun if you:

  • Are buying your first Japanese-style knife.
  • Sometimes rock-chop as well as push-cut.
  • Want a lower entry price and a US sharpening service.
  • Like D-shaped handles.

Choose Miyabi if you:

  • Want the sharpest edge and longest edge retention.
  • Use careful technique and soft cutting boards.
  • Want a wider choice of handle styles, including Western handles.
  • Are comfortable paying more.

For how both brands fit alongside German and budget makers, see our kitchen knife brands comparison. If you’re also curious about Miyabi’s German sister brand, see our Zwilling lines comparison.

The complete guide to kitchen knife brands

Kitchen Knife Brands Compared: Wüsthof, Henckels and More
Read the guide

Keep exploring

Guides from other topics

All topics →