Knife Sharpening

Best Whetstones for Knives and Which Grit to Use

Which whetstone grit to use for kitchen knives, a grit chart, the main stone types, whetstones worth considering, and simple starter setups for any budget.

On this page
  1. The short answer: which grit to start with
  2. Whetstone grit chart
  3. Is 600 grit enough to sharpen a knife?
  4. Why grit numbers don’t always match between brands
  5. Types of sharpening stones
  6. Whetstones worth considering
  7. Suggested setups
  8. What sharpening stones do chefs use?
  9. Don’t forget a flattening plate
  10. What to look for when buying

The short answer: which grit to start with

For most kitchen knives, a 1000-grit stone is the best first whetstone. It removes enough steel to sharpen a dull knife and leaves an edge that cuts well for everyday cooking.

From there:

  • Add a finishing stone around 3000–6000 grit if you want a smoother, more refined edge. A combination stone with 1000 on one side and 6000 on the other covers both in one purchase.
  • Add a coarse stone around 220–400 grit only if your knives are chipped, very dull, or you plan to change their bevel angle.

Most home cooks never need more than two grits. Learning to hold a steady angle on one good 1000-grit stone will improve your edges more than buying a full set.

Whetstone grit chart

Grit range Category What it’s for
120–400 Coarse Repairing chips, fixing a broken tip, reprofiling to a new angle, restoring a very neglected edge
600–1000 Medium-coarse to medium Routine sharpening of dull knives; 1000 is the usual all-rounder
1500–3000 Medium-fine Refining the edge after 1000; a good single finishing step for Western stainless knives
4000–8000 Fine Polishing and refining; common finishing range for Japanese knives
10000+ Very fine Near-mirror finishes, razors; little practical benefit for most kitchen use

A lower number means coarser abrasive. Coarse stones work fast but leave deeper scratches. Fine stones remove little steel but leave a smoother, more polished edge. Each step up should remove the scratches left by the one before. Jumping from 400 straight to 8000 usually takes much longer than going 400, 1000, then 6000.

Is 600 grit enough to sharpen a knife?

Yes, 600 grit will sharpen a knife. The edge will be fairly coarse (“toothy”), which some people like for slicing through tomato skins, crusty bread or meat with connective tissue. Most people find the edge feels rougher and dulls a little faster than one finished at 1000 or above. A practical approach is to sharpen at 600 or 1000 and, if you want, refine at 3000–6000.

Why grit numbers don’t always match between brands

Grit numbers are based on abrasive particle size, but there’s more than one grading system. Japanese stones usually follow the Japanese JIS scale. Many Western abrasives use FEPA or ANSI scales, and some makers quote particle size in microns instead. A “1000” from one system isn’t the same size as a “1000” from another.

Even within one system, stones cut differently depending on the abrasive, the binder and how hard the stone is. A hard, fast-cutting 1000 can feel quite different from a soft, muddy one. Treat grit numbers as a rough guide and compare stones within the same brand where you can.

How to tell what grit a whetstone is

  • Look for a label or stamp. Most synthetic stones have the grit printed on the side or on the base, though it can wear off.
  • Don’t rely on colour. Colours aren’t standardised, and each brand uses its own.
  • Compare against a known stone. Sharpen a test area on a known 1000 stone, then on the mystery stone, and compare how fast it raises a burr and how fine the scratch pattern looks.
  • Feel and sound give some clues: coarse stones feel gritty and loud, fine stones feel smooth and quiet. This is only an estimate.

Types of sharpening stones

Type How it’s used Strengths Trade-offs
Soaking water stones Soak in water before use (often 10–15 minutes, or until bubbles stop; follow the maker) Form a useful slurry, feel forgiving, widely available and affordable Setup time; softer ones wear and dish faster
Splash-and-go water stones Splash water on the surface; many shouldn’t be soaked Ready quickly, often hard and fast-cutting Usually cost more; some feel less forgiving
Oil stones (India, Arkansas) Used with honing oil Durable, traditional; good for pocket and outdoor knives Slower on hard modern steels; messier; don’t switch an oiled stone to water
Diamond plates Used dry or with water Stay flat, cut very hard steel quickly, double as stone flatteners Coarse grits can be aggressive; fine finishing options are more limited
Natural stones Varies Unique finishes prized by enthusiasts Inconsistent, expensive, not a good starting point

For kitchen knives, synthetic water stones (soaking or splash-and-go) are the most common choice. Diamond plates are especially useful for very hard steels and for keeping your other stones flat.

Whetstones worth considering

Prices and product lines change, so this is a list of long-running, widely recommended stones rather than a ranking.

  • King KDS 1000/6000 combination stone. A classic soaking stone and one of the most common first whetstones. The 1000 side sharpens and the 6000 side polishes. It’s softer than enthusiast stones, so it needs flattening more often, but it’s forgiving to learn on.
  • Shapton Pro (Kuromaku) series. Hard, fast-cutting splash-and-go stones that sharpening enthusiasts often recommend. The 1000 is a popular single stone, and higher grits are available to build a progression.
  • Shapton Glass series. Thin, hard stones on a glass backing, also splash-and-go. Popular with people sharpening harder steels, though they can feel less forgiving to beginners.
  • Naniwa stones. Naniwa makes several lines, from budget soaking stones to its Professional series (formerly Chosera). Check whether a given Naniwa stone should be soaked or only splashed.
  • Suehiro stones. Japanese stones, including the Cerax soaking stones, often recommended for their feel and slurry.
  • Diamond plates (for example DMT or Atoma). Useful for chip repair, very hard steels, pocket knives in the field, and flattening water stones.
  • Budget two-sided combination stones (often 1000/6000 or 400/1000 with a bamboo base). Fine for learning. Quality varies between sellers, and the grit numbers on cheap stones aren’t always accurate.

Suggested setups

Who you are Suggested stones
Home cook, Western stainless knives, sharpening a few times a year One 1000 stone, or a 1000/3000 or 1000/6000 combination
Japanese knives or harder steels A hard 1000 (splash-and-go works well) plus a 4000–6000 finishing stone
Chipped, very dull, or second-hand knives Add a 220–400 coarse stone or coarse diamond plate
Pocket and outdoor knives A medium and fine diamond plate, or a combination oil stone; both travel better than soaking stones

Whatever you choose, add a strop if you want an easy way to clean up the final edge. Our guide to strops for Japanese knives covers options that suit any kitchen knife.

What sharpening stones do chefs use?

There’s no single standard. Many professional cooks keep a medium stone around 1000 and a finer stone somewhere in the 3000–6000 range, often from Japanese makers like those above. Cooks who sharpen often tend to prefer harder splash-and-go stones because they’re ready quickly and stay flat longer. Many restaurant kitchens also use professional sharpening services rather than sharpening in-house.

Don’t forget a flattening plate

Every water stone wears unevenly and develops a dip in the middle. A dished stone makes it harder to hold a consistent angle and can round the edge. Flatten your stones every few sessions with a flattening plate, a coarse diamond plate, or wet-and-dry sandpaper on a flat surface. Draw a pencil grid on the stone first. When the grid is gone, the surface is flat.

What to look for when buying

  • Size: a full-size bench stone, roughly 8 inches (about 200 mm) long and 2.5–3 inches wide, is easier to use with a chef’s knife than a small stone.
  • Soaking or splash-and-go: splash-and-go is more convenient if you sharpen often. Soaking stones are often cheaper and more forgiving.
  • A stable base: a rubber holder, non-slip base or damp towel keeps the stone from moving.
  • Reputable grit labelling: established brands tend to grade more consistently than unbranded stones.

Once you have a stone, follow our step-by-step guide to sharpening with a whetstone. If the edge doesn’t seem to improve, the problem is often the burr. See how to raise, feel and remove a burr. For the right angle to hold, see our guide to knife sharpening angles.

The complete guide to knife sharpening

Best Knife Sharpening Angle: 15 vs 20 Degrees
Read the guide

Keep exploring

Guides from other topics

All topics →