The short answer
15 degrees is sharper. A 15° per side edge is thinner than a 20° edge, so it enters food with less resistance and feels keener.
20 degrees is more durable. The extra steel behind a 20° edge makes it less likely to roll, dent or chip, which is why it suits softer steels and rougher work.
That’s the angle alone. How sharp a knife actually feels also depends on how cleanly it was sharpened, which is why a well-finished 20° edge can outperform a poorly finished 15° one.
Why a lower angle cuts more easily
An edge is a wedge. The narrower the wedge, the less force it takes to push it through food and the less it splits and drags as it goes. At 15° per side, the two bevels meet at 30° in total. At 20° per side they meet at 40°. That difference is easy to feel on a ripe tomato, an onion or a thin slice of fish.
The cost is strength. A thinner wedge has less steel supporting the very edge, so sideways force, twisting, bone, frozen food and hard cutting boards affect it more.
Two parts of “sharp”: angle and apex
People use “sharp” for two different things:
- Edge geometry: the angle, and how thin the blade is just behind the edge. This sets how easily the knife can cut.
- Apex quality: whether the two bevels actually meet in a clean, fine line, with no burr, rounding or damage. This sets how well it cuts right now.
A 15° edge that still has a burr hanging off it, or that was sharpened with a wobbly angle, will feel dull. A 20° edge that’s been sharpened consistently, deburred properly and maybe stropped will feel very sharp. So the angle matters, but it isn’t the whole story. If your knives never feel as sharp as you expect, the burr is a common culprit. Our guide on how to raise, feel and remove a burr covers it.
Which stays sharp longer?
It depends on the steel and how you use the knife:
- On softer steels, a 20° edge usually stays usable longer, because a 15° edge on soft steel tends to roll quickly.
- On harder steels, a 15° edge can hold up well in ordinary kitchen use. Hard steel resists rolling, though it’s more likely to chip if abused.
- In heavy use (bone, hard squash, outdoor tasks), the wider edge generally lasts longer regardless of steel.
A good working rule: use the lowest angle your knife and your cooking habits can support without the edge rolling or chipping too often.
15 vs 20 at a glance
| 15° per side | 20° per side | |
|---|---|---|
| Initial sharpness | Higher | Slightly lower |
| Cutting effort | Less | A little more |
| Resistance to rolling and chipping | Lower | Higher |
| Best on | Harder steel, thin blades | Softer steel, thicker blades |
| Typical knives | Japanese kitchen knives, many modern Western chef’s knives, fillet knives | Traditional German knives, budget kitchen knives, pocket knives |
| Best for | Slicing, fine prep | Mixed, heavier tasks |
For factory angles from specific makers, see our list of sharpening angles by brand.
Can you use a 20° sharpener on a 15° knife?
Yes, and it will work, but it changes the knife. The first passes put a small 20° bevel at the very edge. Each later sharpening widens that bevel until the whole edge is 20°. The knife becomes more durable and less keen than it was designed to be.
Going the other way, sharpening a 20° knife at 15°, takes longer. You have to grind away the shoulder of the old bevel before the new angle reaches the edge. Fixed-angle pull-through sharpeners make this kind of change without you noticing. See whether pull-through sharpeners are bad for your knives.
The middle ground: 17 degrees and micro-bevels
You don’t have to choose strictly between 15° and 20°:
- 17° per side is a common compromise for Western knives that see mixed use. It’s noticeably keener than 20° but more forgiving than 15°.
- A micro-bevel is a few light strokes at a slightly higher angle (say 17–20°) after sharpening at 15°. It adds a tiny, sturdier bevel at the edge while the rest stays thin, and it’s quick to refresh.
For a fuller explanation of angles, reprofiling and how to hold a given angle by hand, see our guide to 15 vs 20 degree sharpening angles. If you want a quick recommendation for a particular knife, see what’s the best angle to sharpen a knife.