Knife Sharpening

What's the best angle to sharpen a knife?

The best sharpening angle for most knives is 15–20° per side. Here's how to pick the right one for your knife's steel, its job and its current bevel.

On this page
  1. The short answer
  2. Best angle by knife type
  3. Three questions that settle it
  4. Why holding the angle matters more than the number
  5. If you still can’t decide

The short answer

For most knives, the best sharpening angle is between 15 and 20 degrees per side. Use around 15° for thin, hard blades used for slicing, such as most Japanese kitchen knives. Use around 20° for thicker or softer blades that take more abuse, such as German-style kitchen knives and most pocket knives.

For your particular knife, the best angle is usually the one it already has. Matching the existing bevel takes the least work and removes the least steel. Change it only if the edge isn’t working for you.

Best angle by knife type

Knife Typical angle per side
Japanese kitchen knives (gyuto, santoku, petty) 10–15°
Western chef’s and utility knives 15–20°
Fillet and boning knives 15–20°
Pocket and everyday-carry knives 17–22°
Hunting and outdoor fixed blades 20–25°
Cleavers, choppers, machetes 25° or more

These are typical ranges. If the maker publishes an angle, start there. Our list of sharpening angles by brand covers several common makers, and our guide to what angle kitchen knives should be sharpened at goes through each kitchen knife in more detail.

Three questions that settle it

What is the knife made of?

Harder steels, common in Japanese knives, can support a thinner edge, so they suit lower angles. Softer stainless steels, common in budget and traditional Western knives, tend to roll at very low angles and usually do better nearer 20°. If you don’t know the steel, where the knife was made and what it cost are rough clues: Japanese-made knives are usually harder than inexpensive Western ones.

What do you cut with it?

  • Mostly slicing soft food (vegetables, herbs, boneless meat, fish): a lower angle cuts with less effort.
  • Mixed, heavier work (squash, chicken joints, hard rinds, outdoor tasks): a higher angle holds up better.
  • Contact with bone, wood or anything hard: go wider again, 20–25° or more.

What angle does it have now?

Colour the edge bevel with a marker, make a light stroke on your stone, and see where the ink comes off. If it comes off evenly, you’ve found the angle. If only the edge loses ink, lower the spine. If only the top of the bevel loses ink, raise it. Our full guide to sharpening angles explains this test, plus a simple way to estimate the angle from the height of the spine.

Why holding the angle matters more than the number

A knife sharpened at a steady 18° will usually cut better than one sharpened at a wobbly 15°. When the angle rocks from stroke to stroke, the edge becomes rounded and may never form a clean apex, so it feels dull even after a lot of work.

If you’re sharpening freehand, pick an angle you can hold comfortably and repeat it. An angle guide, a guided system, or a rolling sharpener with a magnetic holder can help if your hands drift. Our step-by-step whetstone guide includes tips on keeping the angle steady through the curve toward the tip.

If you still can’t decide

  • Japanese or thin, hard kitchen knife: 15° per side
  • Western kitchen knife: 15–17° if it’s a quality modern knife, 20° if it’s older, thick or inexpensive
  • Pocket knife: 20° per side
  • Hunting or outdoor knife: 20–25° per side

You can always adjust later. Raising the angle is quick. Lowering it takes more work, so start a little higher if you’re unsure. If you’re torn between the two most common options, see whether 15 or 20 degrees is sharper.

The complete guide to knife sharpening

Best Knife Sharpening Angle: 15 vs 20 Degrees
Read the guide

Keep exploring

Guides from other topics

All topics →