Knife Steel

Maxamet Steel Knives: Extreme Edge Retention Explained

Maxamet is a powder high-speed steel known for extreme hardness and edge retention. Learn how it works, its trade-offs, which knives use it and how to care for it.

On this page
  1. What Maxamet is
  2. Composition and hardness
  3. Why Maxamet holds an edge so long
  4. The trade-offs
  5. Knives with Maxamet steel
  6. Maxamet compared with other high-wear steels
  7. Who Maxamet suits
  8. Care and sharpening tips
  9. Related questions

What Maxamet is

Maxamet is a powder metallurgy high-speed steel made by Carpenter Technology (sold under its Micro-Melt and CTS names). High-speed steels were developed for industrial cutting tools that must stay hard at high temperatures. Maxamet was originally aimed at tooling such as cutters and wear parts, not knives.

Knife enthusiasts became interested in it because it can be hardened far beyond most knife steels and contains a large volume of very hard carbides. The result is a blade with exceptional edge retention, which comes with clear trade-offs.

Not the same as Maxam knives

Searches for “Maxamet knives” often turn up Maxam, a separate brand of budget kitchen, pocket and hunting knives. The two are unrelated. Maxam is a brand name; Maxamet is a specific steel. If you want a knife made from Maxamet steel, look for the steel name in the product specifications.

Composition and hardness

Approximate published composition:

Element Approximate content
Carbon ~2.15%
Tungsten ~13%
Cobalt ~10%
Vanadium ~6%
Chromium ~4.75%

For comparison, most knife steels contain well under 1.5% carbon and little or no tungsten or cobalt. Production Maxamet knives are often cited at around 68–70 HRC, well above the 58–62 HRC typical of most premium pocket knives. See knife hardness explained for context on these numbers.

Why Maxamet holds an edge so long

Edge retention comes mostly from two things: how hard the steel matrix is, and how much hard carbide is in it. Maxamet is high on both. Its tungsten and vanadium form hard carbides that resist abrasion, and its very high hardness keeps the edge from rolling or deforming under pressure.

In practice, Maxamet is among the longest-lasting steels you can buy in a production knife for abrasive cutting tasks such as cardboard, rope, plastic packaging or carpet. Owners often report going much longer between sharpenings than with mainstream stainless steels.

The trade-offs

Toughness and chipping

High hardness and lots of carbide come at the cost of toughness. Maxamet is more prone to chipping than most knife steels if it is twisted in a cut, used to pry, dropped on its edge or used on hard materials such as staples, bone or wood knots. A slightly more obtuse edge angle and careful technique help, but it is not a steel for hard use or abuse.

Corrosion resistance

With under 5% chromium, Maxamet is not stainless. It can rust, particularly from sweat, humidity or food acids. Many Maxamet knives have a coated blade, but the edge itself is still bare steel.

Sharpening

The same carbides that make Maxamet hold an edge make it slow to sharpen. Conventional aluminium oxide stones and many natural stones struggle to cut it efficiently. Diamond plates, or CBN abrasives, are usually recommended. Once it is sharp, touch-ups on a fine diamond or ceramic surface and a strop with diamond compound go much faster than a full resharpening.

Knives with Maxamet steel

Spyderco is the best-known production maker using Maxamet. It has offered the steel in several models over the years, including Maxamet versions of the Para 3 Lightweight, Manix 2 Lightweight and Native 5. Availability changes between production runs, so check current listings for specific models.

A small number of other production and custom makers have also used Maxamet. Because it is hard to grind, heat treat and finish, it is much less common than mainstream premium steels.

Maxamet compared with other high-wear steels

Ratings are relative and general.

Steel Edge retention Toughness Corrosion resistance Ease of sharpening
Maxamet Exceptional Low Low Very hard
Rex 121 Exceptional Low Low Very hard
K390 Very good Good Low Hard
S90V Very good Low–moderate Good Hard
M390 / 20CV Very good Moderate Very good Hard
MagnaCut Good–very good Good Very good Moderate

If you want very long edge life with more forgiveness and stainless performance, a steel like MagnaCut, M390 or S90V may be a better all-round choice.

Who Maxamet suits

Maxamet makes most sense for someone who:

  • does a lot of abrasive slicing, such as warehouse work, packaging or cordage
  • uses a knife for cutting rather than prying or chopping
  • owns diamond sharpening equipment, or is willing to buy it
  • doesn’t mind wiping the blade to prevent rust

It is a poor fit as a first good knife, a hard-use outdoor knife, a kitchen knife, or a knife for someone who wants quick sharpening on basic stones. For an overview of steels for different jobs, see our guide to the best knife steel.

Care and sharpening tips

  • Wipe the blade dry after use, especially after cutting food or carrying it against your body in warm weather.
  • Apply a light coat of oil if storing the knife for a while.
  • Use diamond plates for sharpening, and avoid excessive pressure on a thin edge.
  • Consider a slightly more obtuse edge if you notice microchipping.
  • Strop with diamond compound on a hard backing for maintenance.

What steel does Benchmade use?

Benchmade uses many steels across its range rather than a single house steel. Over the years these have included 154CM, CPM S30V, CPM S90V, CPM M4, CPM 3V, D2, 14C28N and CPM MagnaCut, among others. The steel is listed on each model’s specifications.

Which knives use MagnaCut?

MagnaCut has been adopted by many makers since its release, including Benchmade, Spyderco, Buck, Leatherman and numerous custom and small-batch makers. See MagnaCut steel: why knife makers are switching to it for more.

The complete guide to knife steel

Best Knife Steel: What Metal Makes a Good Blade
Read the guide

Keep exploring

Guides from other topics

All topics →